Photobucket

Monday, July 23, 2012

Springer Repair Part 2

So on to fixing the front legs basically its the same process as the rear legs its just getting the legs line up properly, measured out, and set in the jig properly Setting up the jig here for the new chock that will hold the spring rods Uploaded from the Photobucket iPhone App cleaning out the grime on the rocker holes Uploaded from the Photobucket iPhone App then onto the slug parts all fitted and welded up into the lower leg portion Uploaded from the Photobucket iPhone App sitting pretty in the jig all lined up nice Uploaded from the Photobucket iPhone App Uploaded from the Photobucket iPhone App Uploaded from the Photobucket iPhone App after the first 2 passes of welding and the first pass with the flap disc Uploaded from the Photobucket iPhone App filler pass with silicone bronze Uploaded from the Photobucket iPhone App smoothing and finishing Uploaded from the Photobucket iPhone App all ready to be assembled Uploaded from the Photobucket iPhone App Uploaded from the Photobucket iPhone App Uploaded from the Photobucket iPhone App all back together Uploaded from the Photobucket iPhone App Uploaded from the Photobucket iPhone App Uploaded from the Photobucket iPhone App

No comments:

Post a Comment