Thursday, September 6, 2012

Mid Controls Shifter Side Almost Done

Cut up a plate to keep the kickstand in the stock location with the longer fork tubes and the mid controls a mid mount kickstand is going to get in the way and not really support the bike properly while kickstarting still has to be trimmed down a little bit and cleaned up but you get the idea Uploaded from the Photobucket iPhone App started on the shifter side mid control tonight Im almost finished with it just need to weld up a support for the shifter arm and do up a linkage for the ratchet top on the trans started with this Uploaded from the Photobucket iPhone App Uploaded from the Photobucket iPhone App machined up a piece to hold the brass bushing into the plate for the shifter rod Uploaded from the Photobucket iPhone App welded it into the plate and pressed the bushing back into place Uploaded from the Photobucket iPhone App starting to layout the the foot position Uploaded from the Photobucket iPhone App Uploaded from the Photobucket iPhone App and have all the spacers cut and mounted etc. foot peg in place just need to make up a support for the shifter portion and make the linkage for it to the ratchet top and we are all done Uploaded from the Photobucket iPhone App Uploaded from the Photobucket iPhone App Uploaded from the Photobucket iPhone App

No comments:

Post a Comment